Panasonic EW-BU35W - Manual (Page 11)

BEFORE USE
10
English
Replace batteries when :
Inserting batteries
Always use alkaline batteries. (4 AA-size LR6 alkaline batteries) *
When replacing batteries, always use 4 fresh alkaline batteries of the same type from *
the same manufacturer, and replace them simultaneously.
If the product will not be used for a long time, remove the batteries. *
When using the main unit with the AC adapter
Be sure to use only the exclusive AC adapter (EW-2B02).
1. Insert the AC adapter plug into the
connector on the side of the main unit.
2. Plug the AC adapter fully into the AC outlet.
Caution when using only the AC adapter
When no batteries are installed in the main unit and the AC adapter is unplugged from the AC outlet
or main unit, the set date and time will be reset and deleted. (Stored data will be retained.) Because of
this, even when using the AC adapter, it is recommended that batteries be installed in the main unit.
1
2
3
1. Turn the main unit over and remove the
battery cover by sliding it in the direction
of the arrow while pressing lightly on .
2. Check the polarity of the batteries and
install them correctly, as shown.
3. Replace the battery cover and slide it closed.
1
3
2
The “low battery” ●
indicator is displayed.
No display appears even ●
if is pressed.
Concerning Batteries :
Batteries last for approx. 500 times, which is 3 times/day for 5 months (when using Panasonic alkaline ●
batteries AA cell LR6). (Under the condition that the room temperature is 73°F (23°C), 170mm Hg pressured,
and the length of upper arm is 11-3/4" (30cm). )
If batteries other than alkaline batteries are used or batteries are used in a cold room, or measuring a person ●
with high blood pressure, battery life may be dramatically shorter.
*Use alkaline batteries. (Panasonic Oxyride batteries can also be used.)
Be sure to replace batteries once a year to prevent battery leakage. ●
CAUTION :
Always follow the cautions printed on the batteries. ●
Check the polarity of the batteries and install ●
them correctly.
Remove worn out batteries promptly. ●
If the product will not be used for a long time, ●
remove the batteries.
Batteries should be used before their expiration date. ●
Use after the expiration date may result in injury or
staining of the surrounding area due to generation
of heat, bursting, or leakage.
BU35.indb 10 2011/06/14 14:28:15