Aspire Digital 6930 series - Manual (Page 59)

Chapter 3 49
External Module Disassembly Process
External Modules Disassembly Flowchart
The flowchart below gives you a graphic representation on the entire disassembly sequence and instructs you
on the components that need to be removed during servicing. For example, if you want to remove the main
board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.
Screw List
Step Screw Quantity Part No.
VGA Module M2.5*8-I BNI NYLOK 4 86.T48V7.001
TV Tuner M2.0*3.0-I (BKAG)
(NYLOK) IRON 2 86.ARE07.002
WLAN Module M2.0*3.0-I-NI-NYLOK 2 86.A08V7.005
Main HDD Carrier M3*0.5+3.5I 4 86.TDY07.003
ODD Module M2.5*6.5-I
(BZN(NYLOK-RED) 1 86.ARE07.001
ODD Bracket M2.0*3.0-I (BKAG)
(NYLOK) IRON 2 86.ARE07.002
HDD2 Module M2.0*3.0-I (BKAG)
(NYLOK) IRON 2 86.ARE07.002
HDD2 Carrier M3*0.5+3.5I 4 86.TDY07.003
Remove
Lower Covers
Remove
NewCard
Dummy
Disconnect power
and signal cables
from system
Remove
Battery
Turn off system
and peripherals
power
Remove
DIMMs
Remove
SD Dummy
Remove
HDD
Remove
ODD
Remove
WLAN
Remove
VGA Module
Remove
TV Tu ner
Remove
HDD2