American Dryer Corp. ADG-758 - Manual (Page 23)

19
2. Electrical Service Specifications
a. Gas Models
IMPORTANT: Figures shown are for Non-Reversing Models ONLY. For reversing models contact
the factory.
IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is
affixed to the back of the dryer, at the upper right hand corner. In the case of
208 VAC or 230/240 VAC, the supply voltage must match the electric service
specifications of the data label exactly.
IMPORTANT: The wire size must be properly sized to handle the related current.
WARNING: 208 VAC and 230/240 VAC ARE NOT THE SAME. Any damage done to dryer
components due to improper voltage connections will automatically VOID THE
WARRANTY.
NOTE: ADC reserves the right to make changes in specifications at any time, without notice or
obligation.
ADG-758 (Gas)
E
LEC TRIC AL
S
ERVIC E
S
PEC IFIC ATIONS
(
P ER DRYER
)*
SERVICE
VOLTAGE
PHASE
WIRE
SERVICE
APPROX.
AMP DRAW
CIRCUIT
BREAKER
60 Hz 50 Hz
120 1 ш 2 12 -- 25
208 1 ш 2 7 -- 1 5
240 1 ш 2 7 4 1 5
208 3ш 3 3 - - 1 5
240 3ш 3 3 3 1 5
380/400 3ш 3/4 -- 2 1 5
416 3ш 3/4 -- 2 1 5
460/480 3ш 3/4 2 -- 1 5
* Contact factory for electrical information not listed.