Alpine SEA-8081 - Manual (Page 40)

40
English
Basic Operation
Valet/Keyless Entry Mode
When the system is placed in the valet mode,
the system is temporarily placed on "hold".
When the system is in valet, it cannot be
armed, however all other functions from the
remote control, including door locking and
unlocking, will still operate. This mode is
ideal for when the car is being serviced,
washed or valet parked.
The SEC-8063 security system can be
placed into valet in two ways:
• through the Disarm/Valet switch
• through the SEC-8463 remote control
Note: Door locks may be optional. Consult
your Alpine dealer for more information.
Disarm/Valet Switch
When the system is placed into valet through
the Disarm/Valet switch, all sensors are
disabled and the system cannot be armed.
However, the panic function can still be
activated.
Placing the System in
Complete Valet:
Turn the Disarm/Valet switch ON (when the
system is disarmed and the ignition OFF) and
hold it for one second.
The Extension LED will illuminate for 2
seconds, indicating that the system is now in
valet.
VALET
1
2 Extension LED
Témoin d'extension
Indicador de extensión
VALET
1
VALET
or/ou/o
EXT 1
VALET