Aastra Telecom 6755i - Manual (Page 76)

68 Model 6755i IP Phone User Guide
Line Keys, Programmable Keys, and Softkeys
Configuring a Line Key
You can set a key as an additional line on the 6755i. The key acts as a line that behaves the same
as a hard line key. For more information about the behavior of line keys, see “Multiple Line and
Call Appearances” on page 59.
You use the Aastra Web UI to set a key as a line.
Use the following procedure to set a key to function as a line. The procedure shows the softkey
screens as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Line to apply to the key.
4. In the "Label" field, enter a label to apply to this key.
5. In the "Line" field, select a line to apply to this key.
Valid values are 5 through 9.
6. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this
softkey.
Aastra Web UI