Asus PW201 - Manual (Page 19)

2 - 3 2 - 3 2 - 3 2 - 3 2 - 3 A S U S L C D M o n i t o r P W 2 0 1 A S U S L C D M o n i t o r P W 2 0 1 A S U S L C D M o n i t o r P W 2 0 1 A S U S L C D M o n i t o r P W 2 0 1 A S U S L C D M o n i t o r P W 2 0 1
• A VGA cable, audio cable, and USB cable comprise the supplied VGA-
audio-USB 3-in-1 cable.
• The component cable is purchased separately.
2.2.1 2.2.1 2.2.1 2.2.1 2.2.1 Connecting a computer equipped with a Connecting a computer equipped with a Connecting a computer equipped with a Connecting a computer equipped with a Connecting a computer equipped with a
VGA/DVI port
VGA/DVI port VGA/DVI port VGA/DVI port VGA/DVI port
1. Plug the VGA, audio, and USB connectors of the supplied
3-in-1 cable to the LCD monitor’s VGA, Line-in, and USB ports
respectively.
2. Connect the other ends of the supplied 3-in-1 cable to your
computer’s VGA, Line-out, and USB ports respectively.
3. Tighten the two screws to secure the VGA connector.
4. Connect one end of the supplied DVI cable to the LCD monitor,
then connect the other end to your computer’s DVI port.
When both the VGA and the DVI cables are connected, you can choose
either VGA mode or DVI mode from the Input Select item of the OSD
functions, or by using the hotkey
on the front panel. See pages 1-3
and 3-4 for details.
3. Connect the cables as shown. Refer to the succeeding sections for
detailed instructions.
Power adapter
DVI cable
VGA cable
Component cable
RCA cable
PC Audio cable
USB 2.0 cable
4. Close the rear connector cover.
Align the cover to the three slots
near the ports and close the cover
carefully. A click indicates that the
cover has been closed successfully.
rear connector cover