Acroprint PD100 - Manual (Page 5)

4
Ribbon Replacement
An Acroprint PD122 Replacement Ribbon will provide the best, trouble free
performance of your PD100.
Warning: Ribbon ink can stain your hands and clothes. Please use extra care
when handling ribbon spools (your pants will thank you).

Remove cover

Grasp both ribbon spools

Pull spools straight out from the side of the unit

The new empty ribbon spool must be placed on the forward post (Figure 3)

Pull new ribbon spools apart about 3-4 inches

Push new spools straight onto posts, while aligning the tab on the spool with the
slot on the PD100

Remove ribbon slack by turning rear spool tabs clockwise

Verify proper printing

Install cover
(Figure 3)