Remove the lcd module, Remove memory, Remove the touchpad ffc and bluetooth cable – Acer 2700 User Manual
Page 63
Advertising

57
Chapter 3
Remove the LCD module
1.
Remove the two screws that secure the LCD hinge on both side.
2.
Remove the screw that secure the LCD on each side of the rear of the main unit.
3.
Pull the LCD module upward and remove it.
Remove Memory
1.
Press the latch on left and right side and pop up the memory.
2.
Then remove the memory
Remove the Touchpad FFC and Bluetooth cable
1.
Release touchpad FFC latch with tweezers and disconnect the touchpad FFC from the main board.
2.
Disconnect the Bluetooth cable from the main board with tweezers.
Advertising
This manual is related to the following products: