ARCHOS TV+ - Manual (Page 66)

MANUAL V1.0 TV+ THE TV PRoGRAM GUIdE > P. 66
“Key: -/--”: Set to “ On ” if normally, you need to press a special key on your tuner’s remote control before
entering a channel with several digit numbers (that is to say a channel greater than 9). This key is often
represented with this symbol: “
-/--”.
“Switches on with”: see below.
“Time until video”: see below.
If the ARCHOS did not manage to switch your tuner to the selected channel,
you can try using a different ON/OFF code (see: 1 st Test: turning your tuner off)
and do the 2 nd test again.
After you selected “ Yes ” at the end of the 2 nd step, the following screen appears.
You will have to set these two parameters:
“ Switches on with ”: this depends on what key you normally press, on your
tuner’s remote control, to turn it on. If you normally press the “ Power ” key,
select “ Power ”. If you can press any channel key, then select “ Any channel ”. If
you can press any key, select “ Any key ”.
“ Time until video ”: select the amount of time it normally takes between the
moment you turn on your tuner, and the moment the image appears on your
TV (“ 0...10 seconds ”, “ 10...30 seconds ”, “ >30 seconds ”).
When you have finished, select “ Done ”, and a confirmation message will appear.
Select “ OK ”.
9.5 sCheduling yOur reCOrding
In the Home screen, select the
“ Recorder ” icon to display the
ARCHOS TV Program Guide.
This screen’s menu items will al-
low you to choose a different day,
update the Program Guide data, or
change various settings (program
guide update and channel list con-
figuration).
1.
2.
-
-
-
3.
-
-
4.