Airlink ARW027 - Manual (Page 15)

9
Connect the Router using Wireless LAN
PC
Notebook
Notebook
Wireless LAN Networking
WirelessBroadband Router
xDSL Modem
WAN port
1. Connect one end of the network cable to the WAN port of the
Wireless Router and connect the other end of the cable to a DSL or
Cable modem.
Powering On
1. Power on the DSL/Cable modem first. Then power on the wireless
broadband router by connecting the power adapter to the power jack of
the router. Finally, power on your computer.
Check the Installation
The control LEDs of the Wireless Router are clearly visible and the status
of the network link can be seen instantly:
1. With the power source on, once the device is connected to a
broadband modem, the Power, LAN, WLAN and WAN port link
LEDs of the Internet Broadband Router will light up indicating a
normal status.
2. When the WAN is connected to the ADSL/Cable modem, the WAN
port’s Link/ACT LED will light up.
3. When the LAN is connected to the computer system, the LAN port’s
Link/ACT LED will light up.