Before you call for service – Alliance Laundry Systems SWD444C User Manual

Page 43

Advertising
background image

Maintenance

41

802031

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Before You Call for Service

You may save time and money by checking the
following:

If the Washer:

If the Dryer:

Won’t

Fill

Won’t

Start

Won’t

Tumble

Won’t

Spin

Won’t

Drain

Possible Reason

–

Do This to Correct

•

Be sure power cord is plugged all the way into the electrical
outlet.

•

•

•

•

Close the loading door tightly.

•

•

•

•

Check the laundry room fuse or circuit breaker.

•

Turn on the hot and cold water faucets.

•

Clean the screens in the water mixing valve and the filter
screens in the fill hoses.

•

•

Are controls properly set?

•

•

Broken drive belt. Call the service person.

•

•

Foreign object trap clogged. Clean foreign object trap.

•

Press the START keypad.

•

Insert coin(s) or card.

Does

Not

Start

Does

Not

Heat

Does Not Dry

Clothes

Satisfactorily

Possible Reason

–

Do This to Correct

•

Insert coin(s) or card.

•

Be sure the cord is plugged all the way into the electrical outlet.

•

Close the loading door.

•

Make sure the controls are in a HEAT setting.

•

Press the START keypad.

•

•

Has the laundry room fuse blown or become loosened, or is a circuit breaker
OFF? The dryer itself does NOT have an electrical fuse.

•

Has the motor overload protector cycled? Wait 10 minutes and try again.

•

Clean the lint filter.

•

•

Check the exhaust duct to the outside to see if it is kinked, blocked or needs
cleaning.

•

•

Check the weather hood to make sure the flappers move freely, are not
pushed in or have not been blocked.

•

Is the load too small? Small loads may not tumble properly or dry evenly.

Advertising