Panasonic FS-100 - Manual (Page 40)

Quickstart
FS-100 Portable DTE Recorder
22
Installing / Removing the Battery Pack
Installing a Battery
1.
Place the unit, so that the battery compartment is up.
2.
Position the battery pack, as shown above, so that the
latch hook is almost in the latch slot, and touching the
floor of the battery compartment.
3.
Slide the battery forward while gently pressing down.
4.
Feel the battery slide along guides and seat itself.
5.
When seated, the battery latch clicks into place.
Removing a Battery
1.
Slide the battery latch to the left and hold.
2.
Apply backward pressure to the battery pack at the
triangle/arrow and gently slide the pack back about 1cm
or 3/8 in.
3.
This is the reverse motion of inserting the battery.
4.
Remove the battery pack.
Battery
Latch Hook
Gently press DOWN
while sliding battery pack
FORWARD
Battery Pack Guides
Latch Slot
Latch