Advent CCS562 - Manual (Page 5)

5
System Installation
1. Choose the mounting location for the CAM150 commercial camera on
the rear of the vehicle. We recommend a position as high as possible
and in the center of the vehicle.
2. Choose a suitable place in the vehicle cabin to mount the 5.6” LCD
Screen. We recommend dash mounting in the corner of the vehicle.
3. Examine the vehicle to determine the best way to run the power wires
to: LCD monitor, accessory power, the reverse lights and to the camera
at the rear of the vehicle.
4. Attach the screen to the dash using the supplied 3M adhesive pad or
mounting screws. The mounting bracket has been designed to be bent
to match the shape of the mounting location.
5. Attach the camera to the rear of the vehicle using the supplied
mounting screws of bolts.
6. Run the extension cable from the camera to the front of the vehicle.
7. Run the wiring harness from the LCD monitor and connect up with the
Camera extension cable.
8. Attach reverse & accessory power wires.
9. Connect your reversing camera.
Note: When using an Advent CCS System, the signal and power for the
camera will be supplied through the monitor extension cable. Please also
note that the microphone in the camera will be played on the speaker built
into the LCD monitor.
10. Connect the LCD Monitor to the harness.
11. Power up and adjust on screen settings.
NOTE: To adjust monitor and volume settings
press the menu button on
screen to cycle through the menu options.