Agilent Technologies FIXTURE U7242A - Manual (Page 5)

5
Agilent Technologies
U7242A USB 3.0 Test Fixture Description
The U7242A USB3.0 test fixture is required to perform the measurement
with the Agilent U7243A USB3.0 Electrical Compliance Test Application.
The fixture helps you to easily access the USB3.0 test signals.
The U7242A USB3.0 test fixture is required for the all the Far End (TP1)
tests including:
• Far End Unit Internal test
• Far End SSC Slew Rate test
• Far End Template test
• Far End Peak- to- Peak Differential Output Voltage test
• Far End RMS Random Jitter test
• Far End Maximum Deterministic Jitter test
• Far End Total Jitter at BER- 12 test
Figure 1 U7242A USB3.0 Test Fixture Board