AT&T 945 - Manual (Page 6)

6
Turn line usage on or off for each
line
If you are not using all four phone lines at this extension,
you need to turn off line usage for the unused lines. If
you expand to a second, third or fourth line, turn line
usage back on. Line I must be turned on for the intercom
to work.
NOTE: You may use any combination of lines. Lines
used do not need to be in order. For example, line
usage can be turned on for Lines 1 and 3 and turned
off for Lines 2 and 4.
You may also restrict the use of certain lines on this
phone to intercom and paging only by turning off line
usage for each line you want restricted. When line usage
is turned off, that line cannot be used to answer incoming
calls or to make outgoing or transfer calls.
1. Press E to begin feature setup.
2. Press
- until the screen display includes
SPECIAL H OPTIONS.
3. Press E. The screen display includes
LINE H USAGE.
4. Press E. The screen display includes
L1 H USAGE and the current setting for this
line.
5. Press
< or > to toggle between On and Off
for the line shown.
6. Press
- to save the current setting for this line
and move to the next line with its current line
usage setting.
7. Repeat steps 5 and 6 to set line usage for
other lines at this extension.
8. When you are finished setting line usage,
press
- until the screen display includes
DONE.
9. Press E. The screen display includes
LINE H USAGE.
10. Press and hold E to return to the idle
screen.
NOTE: You can exit feature setup and return to the
idle screen any time. Simply press and hold
E.
i i i i i
k k k k k
o o o o o
n n n n n
945QSG_(rev22)ml23.5.06 5/23/06 11:29 AM Page 6