Avanti DG 2401 C - Manual (Page 17)

17
REMOVING THE OVEN DOOR
Type B
The oven door can easily be removed as follows:
– Open the door to the full extent (fig. 5.13A).
– Attach the retaining rings to the hooks on the left and right hinges (fig. 5.13B).
– Hold the door as shown in fig. 5.13.
– Gently close the door and withdraw the lower hinge pins from their location (fig.
5.13C).
– Withdraw the upper hinge pins from their location (fig. 5.13D).
– Rest the door on a soft surface.
– To replace the door, repeat the above steps in reverse order.
Fig. 5.13D Fig. 5.13C
Fig. 5.13B
Fig. 5.13A
Fig. 5.13
ቦ
REMOVING THE OVEN DOOR
Type A
To facilitate oven cleaning, it is possible to remove the door.
Please follow the instructions carefully:
– Open the door completely.
– Push down the lever “L” and, keeping it in this position, slowly close the door in order
to block the hinge (fig. 5.10).
– Grip the door (as indicated in fig. 5.11) and, while closing it, release the two hinges
as shown in fig. 5.12.
– Rest the door on a soft surface.
DOOR ASSEMBLY
– Grip the door with your hands placed near the hinges and raise the levers “H” with
your forefingers (fig. 5.12)
– Insert the hinges in their position until levers “H” are hooked.
– Open the door completely to obtain the release of levers “L”.
L
Fig. 5.10
Fig. 5.11
H
Fig. 5.12