Panasonic KV-S1026C - Manual (Page 35)

4. Place the documents on the feed tray with the side to be scanned facing down.
• Set the leading edge of documents as shown in the illustration (A).
1
Note
• Place the documents as shown in the illustration.
• The height of all the documents on the tray should be less than 5 mm.
Exceeding this height might cause paper jams or skewing.
• When the paper is thin, it may not be fed properly due to curls in the paper. In that case, press the
front part of the exit support (A) to use the exit support.
1
Operating Manual 35
Operation