Panasonic VideoCam Suite 1.0 - Manual (Page 16)

Start and the main screen
Names and functions of parts of the main screen
16
Registration folders in the PC and recognised media (DVD
discs, SD cards, HDD video camera) are displayed.
1. Mode display
This shows the media type
currently selected.
[HDD Mode]
When [HDD] or a folder is selected
[DVD-VR Mode]
When a disc in DVD-VR format is
selected
[DVD-Video Mode]
When a disc in DVD-Video format
is selected
[Video Camera Mode]
When the Panasonic video camera that this software
accompanied is selected
[SD Mode]
When an SD card is selected
2. [HDD]
When there is a folder registered in VideoCam Suite
among the folders stored on the hard disk of the PC, it is
displayed and each subfolder is displayed below it.
• For the methods to register/clear, refer to
l23 .
3. [DVD]
When a DVD disc is recognised, it is displayed and each
drive is displayed below it.
4. [SD]
When an SD card is recognised, it is displayed and each
drive is displayed below it.
• The SD card is not displayed when it is not connected
before starting the VideoCam Suite. When an SD card
is connected after starting the VideoCam Suite, click
the [Settings] button to display the [Settings] screen,
select the drive with an [SD] tab and then click [OK] to
display.
5. [Panasonic Video Camera]
When an HDD camera or a DVD video camera that this
software accompanied is recognised, it is displayed.
6. [Update device] button
This refreshes the media/folder display. Click this when
the connected media is not displayed.
Tips
z When a folder or a drive is not displayed below the icon,
click [ ] on the left-hand side of the icon to display the
folder or the drive as shown below.
z When the right-hand side of the folder display is hidden, move
the scroll bar to the right to reveal the complete display.
1 Media/folder selection area
2
3
4
5
6
1
MC20_eng.book 16 ページ ２００７年１０月２４日 水曜日 午後２時１分