Panasonic PT-L6510EL - Manual (Page 2)

2
PT-L6600L/L6510L
BriteOptic™ LCD Projector
S P E C F I L E
Specifications
Main Unit
Power supply: 100 – 240 V AC, 50/60 Hz
Power consumption: 600 W (during standby mode with fan stopped: Max. 10 W)
Max amps: 5.0 A
Colour system: PAL/PAL-M/PAL-N/SECAM/NTSC/M-NTSC
LCD panel: Panel size: 1.3˝ (diagonal)
Display method: Transparent LCD panel with Micro Lens Array (MLA) (x 3, R/G/B)
Drive method: Active matrix
Pixels: PT-L6600L: 1,398,784 (1,366 x 1,024) x 3
PT-L6510L: 786,432 (1,024 x 768) x 3
Pixel configuration: Stripe
Screen aspect ratio: 4:3 (16:9 compatible)
Lens: Optional
Lamp: 220 W UHM lamps (x 2) (BriteOptic™ Dual Lamp System)
Colours: Full colour (16,777,216 colours)
Brightness 1 : PT-L6600L: 3600 ANSI lumens (dual lamp, high mode)
1800 ANSI lumens (single lamp, high mode)
PT-L6510L: 4200 ANSI lumens (dual lamp, high mode)
2100 ANSI lumens (single lamp, high mode)
Centre-to-corner uniformity ratio 1 : More than 90%
Contrast 1 : PT-L6600L: 400:1 (full field), PT-L6510L: 600:1 (full field)
Resolution: PT-L6600L: RGB: 1366 x 1024 pixels, Video: 1000 TV lines
PT-L6510L: RGB: 1024 x 768 pixels, Video: 760 TV lines
Scanning frequency: RGB: Horizontal: 24–97 kHz, Vertical: 50–120 Hz
YP B P R : 480p: f H 31.5 kHz; f V 60 Hz
720p: f H 45 kHz; f V 60 Hz
1080i: f H 33.75 kHz; f V 60 Hz
S-Video/Video: Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz
Screen size: 762–7,620 mm (30–300 inches) diagonally
Throw distance: 1.4–14.6 m
Optical axis shift: 10/10–1/19
Installation: Ceiling/desk, front/rear (menu selection)
Built-in speakers: Size: 7 x 4 cm (x 2)
Output power: 6 W (3 W + 3 W) (10% THD)
Terminals: DVI-D IN: DVI-D 24-pin x 1
DVI-D OUT: DVI-D 24-pin x 1
RGB1 IN: BNC x 5
R, G, B: 0.7 Vp-p (1.0 Vp-p for Sync on G), 75Ω
HD/VD/SYNC: TTL, high impedance (positive/negative polarity)
RGB2 IN: D-sub HD 15-pin x 1
Y, P B , P R : Y: 1.0 p-p, 75Ω, P B/ P R : 0.7 Vp-p, 75Ω
R, G, B: 0.7 Vp-p (1.0 Vp-p for Sync on G), 75Ω
HD/VD/SYNC: TTL, high impedance (positive/negative polarity)
AUDIO IN for RGB: M3 (L, R) x 1, 0.5 Vrms
RGB OUT: D-sub HD 15-pin x 1
G: 0.7 Vp-p (1.0 Vp-p for Sync on G), 75Ω
R, B: 0.7 Vp-p, 75Ω
HD/VD: TTL, high impedance (positive/negative polarity)
Y, P
B
, P
R
: Y: 1.0 p-p, 75Ω, P
B/
P
R
: 0.7 Vp-p, 75Ω
VIDEO IN: BNC x 1, 1.0 Vp-p, 75Ω
VIDEO OUT: BNC x 1, 1.0 Vp-p, 75Ω
S-VIDEO IN: Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75Ω
AUDIO IN for VIDEO: RCA (L, R), 0.5 Vrms
AUDIO OUT: M3 (L, R) x 1, 0–2.0 Vrms (variable)
SERIAL: D-sub 9-pin x 1 (RS-232C)
REMOTE: D-sub 9-pin x 1 (for external control)
Wired remote IN: M3 x 1
Wired remote OUT: M3 x 1
USB IN: Type B x 1 (up, for wireless mouse)
USB OUT: Type A x 1 (down, for USB hub)
Power cord length: 2.5 m
Cabinet material: ABS/PC
1: With the ET-LE200 optional lens mounted
as of November 2002