User controls – ACCO Brands NOBO User Manual
Page 29
1. Input the old password.
2. Changes a new password.
3. Confirms the password, please input the new password once
again.
4. Password must be 4~8 bits, Default value is “0000”.
5. Displayed on the screen by “*” while inputting.
6.
Use
keys to select your input bits, and then press
the “Enter” key to confirm your selection.
7. Move to
and then press the “Enter” key to confirm finally.
8. On this Screen, press the “Menu” key to switch between the
position at present to, Old Password, New Password, Confirm
Password
and
.
9. When there is an input error go to
to delete the bit.
(You can press the “Menu”, and then press the
key.)
Zoom
Press the to reduce the size of an image.
Press the to magnify an image on the projection screen.
Reset
Choose “Yes” to return the display parameters on all menus to the
factory default settings.
29
... English
User Controls
❖
❖