Alpatronix HX110 Wireless Over Ear Bluetooth 4.0 Headphones & Rechargeable Stereo Headset - Manual (Page 5)

5
Compatibility with Windows desktops, laptops, tablets, and smartphones may vary and
depend on the specific driver installed on your device. Windows products do not use a
universal Bluetooth driver, and Alpatronix cannot guarantee compatibility of every driver with
the HX110. You can search and install Bluetooth drivers that support the standards listed
above manually. Alpatronix does not offer a specific driver for the HX110.
Please note that Bluetooth technology operates on a Master/Slave system. The streaming
source is the Master, and the HX110 is the Slave. Your device is responsible for how audio
is played through the headphones. While the HX110 has the latest Bluetooth and audio
technology built in, your device must also be equipped with the same technology in order to
enjoy the full capability of the HX110.
Step IV. Turn the headphone ON/OFF
To turn the headphones ON, press and hold the Multifunction button (S1) for 5 seconds. The
LED will flash blue, followed by a long tone. When the headphones are turned on, it will
automatically search for the paired device and connect to it if available. If the paired device
is not available, the headphones will enter standby mode indicated by a flashing red LED.
After 3 minutes, the headphones will automatically shut off.
To turn the headphones OFF, press and hold the Multifunction Button (S1) again for 5
seconds. The LED will flash red three times, followed by a long tone.
If your paired device goes outside the Bluetooth range of the HX110, it will automatically
enter standby mode, and after 3 minutes it will shut off.
LED Indicator Guide:
Color Flashing Pattern Indicates
Blue Flashing Slowly HX110 is turned on and paired.
Alternate
Red and Blue Flashing Slowly HX110 is turned on and searching for the most
recent paired device.
Alternate
Red and Blue Flashing Rapidly HX110 is in pairing mode, ready for the
Bluetooth device to be paired.
Red Flashing Slowly Battery power is less than 10% (30 minutes).
Blue Solid HX110 is charging.
Red Solid HX110 is fully charged.
No indicator Power off