Acer Aspire L310 - Manual (Page 54)

46 Chapter 2
Super IO Device
Parameter Description Options
Onboard FDC Controller Select Enabled if your system has a floppy disk
controller (FDC) installed on the system board
and you wish to use it. If you install an add-in
FDC or the system has no floppy drive, select
Disabled in this field. Enabled
Disabled
Onboard Serial Port 1/2 Select a logical COM port name and matching
address for the first and second serial ports.
Select an address and corresponding interrupt
for the first and second serial ports. Please refer to the BIOS on your
system for actual options.
Onboard Parallel Port Select a logical LPT port address and
corresponding interrupt for the physical parallel
port. Please refer to the BIOS on your
system for actual options.
ECP Mode Use DMA Select a DMA channel for the port. Please refer to the BIOS on your
system for actual options.
Onboard FDC Controller [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
F5:Previous Values F7:Default Settings
KLIJ :Move Enter: Select +/-/PU/PD :Value F10:Save ESC:Exit F1:General Help
Phoenix - AwardBIOS CMOS Setup Utility
SuperIO Device
Item Help
Menu Level X