BRAVEN 705 - Manual (Page 6)

PAIR TWO SPEAKERS TOGETHER
FOR LEFT & RIGHT STEREO SOUND
Want even bigger sound? If you have two Braven
speakers (Braven 705, Braven 710, Braven 770, Braven
LUX), you can pair them together for left and right stereo
using TrueWireless™ Technology. Here’s how you do it:
First be sure to disconnect all Bluetooth ® connections
(if any) on your device and remove any previously paired
BRAVEN speakers from your device.
Next, press and hold the battery check button on both
BRAVEN speakers for 5 seconds until you hear a sonar
sound from each speaker. Within 30 seconds, a second
beep will indicate a Bluetooth
® connection between the
BRAVEN speakers.
Now that the speakers are talking to one another, you
need to get them talking to your device.
Follow the steps in section one to pair your
device with one (not both) of your BRAVEN
speakers.
When you turn off either of the BRAVEN
speakers while connected, both speakers
will turn off. When you’re ready to rock
again in TrueWireless™ Technology, press the power button
on both BRAVEN speakers within 5 seconds of each other.
Wait approximately 15 seconds. The BRAVEN speakers will
automatically reconnect to each other and to the previously
connected device. You will hear two beeps indicating Bluetooth
®
is reestablished.
Note: TrueWireless™ Technology only supports one active Bluetooth® connection to your
device at the same time. If any other Bluetooth® device (other than the paired BRAVEN 705
speakers) is simultaneously connected to your device, the BRAVEN 705 audio will distort.
If distortion occurs, power down all other Bluetooth® devices in range of your phone/tablet,
other than the Braven 705. Refresh the Bluetooth® connections on your phone/tablet by
turning Bluetooth® off and then back on. TrueWireless™ Technology is now reestablished.
For troubleshooting and tutorial videos, please go to www.BRAVEN.com/TrueWireless
2