Axis Communications 210/211 - Manual (Page 7)

7 AXIS 210/211 - Product Features
Overview
Power Connector - For connection of the PS-K power adapter (included).
I/O Connector - The I/O terminal connector provides the physical interface to one
transistor output, one digital input and an auxiliary connection point for DC power. For
more information, see The I/O Terminal Connector, on page 42.
Network Connector - The camera connects to the network via a standard network
connector. Supporting NWAY, the camera detects the speed of the local network segment
(10BaseT/100BaseTX Ethernet). This socket can also be used to power the AXIS 211 via
PoE (Power over Ethernet).
Serial Number - This number is used during installation.
Control Button - Press this button to install using the AXIS Internet Dynamic DNS Service
(see page 11) or to restore the factory default settings, as described in Resetting to the
Factory Default Settings, on page 41.
Power connector
DC-Iris control cable
(AXIS 211)
Rear panel
AXIS 211
connector
I/O terminal
Network connector
(and PoE for AXIS 211)
Status AXIS 210
Underside
indicator
AXIS 211
DC-Iris
Focus puller
Status
indicator
Tele/wide puller
Control
cable
Power indicator
Network indicator
Control button
Serial number
Mounting screw
hole