COOK CAC - Manual (Page 8)

8
Corporate Offices: 2015 E. Dale Street Springfield, MO 65803 417.869.6474
lorencook.com
CAC IOM - July 2004
Limited Warranty
Loren Cook Company warrants that your Loren Cook fan was manufactured free of defects in materials and workmanship, to the extent stated herein. For a period of one (1)
year after date of shipment, we will replace any parts found to be defective without charge, except for shipping costs which will be paid by you. This warranty is granted only to
the original purchaser placing the fan in service. This warranty is void if the fan or any part thereof has been altered or modified from its original design or has been abused,
misused, damaged or is in worn condition or if the fan has been used other than for the uses described in the company manual. This warranty does not cover defects resulting
from normal wear and tear. To make a warranty claim, notify Loren Cook Company, General Offices, 2015 East Dale Street, Springfield, Missouri 65803-4637, explaining in
writing, in detail, your complaint and referring to the specific model and serial numbers of your fan. Upon receipt by Loren Cook Company of your written complaint, you will be
notified, within thirty (30) days of our receipt of your complaint, in writing, as to the manner in which your claim will be handled. If you are entitled to warranty relief, a warranty
adjustment will be completed within sixty (60) business days of the receipt of your written complaint by Loren Cook Company. This warranty gives only the original purchaser
placing the fan in service specifically the right. You may have other legal rights which vary from state to state.
13
2
1
11
12
2
12
3
8 8
7
9
4
6
5
10
CAC-FH Parts List
*Replacement motor does not include cord.
Part
No.
Description
1 Propeller
2 Guard
3 1/2”-13 x 1.5” Hex Bolt
4 3/8”-24 Nut
5 3/8”-24 x 1” Bolt
6 3/8” x 13/16” Washer
7 5/16”-24 x .75” HHC Bolt
8 5/16”-24 Nut
9 5/16” x .688” Washer
10 .88” Conduit Bushing
11 Motor*
12 Housing Assembly / Stand Assembly
13 Split Taper Bushing
6
8 1 8
7
2
11 10
8
12
5
7
3
9
4
11
10
12
CAC-MH Parts List
Part
No.
Description
1 Left Gusset
2 Right Gusset
3 Tubing Assembly
4 Angle Assembly
5 Right Side Channel Assembly
6 Left Side Channel Assembly
7 3/8 - 16 x 1.00” Bolt
8 3/8 - 16 x 2.00” Flanged Bolt
9 3/8 - 16 Flanged Nut
10 Cotter Pin
11 5” Dia. Wheel
12 1/2 x 1.4 x .11 Zinc Washer
(CAC-FH with stand assembly)