Nor-Lake Capsule Pak Refrigeration Systems - Manual (Page 10)

10 07/14 Rev. H 040086
Set the Refrigeration System evaporator section over the
hole in the ceiling section. Align the tabs on the side of
the insulated evaporator section with the predrilled holes
in the ceiling section. Before proceeding to the next
step, the evaporator cover should be removed. Look inside
the evaporator section and be sure the air divider in the
ceiling section lines up with the black gasket divider in the
evaporator section. Some adjustment may be required by
simply bending the ceiling section divider slightly forward or
backward. This will prevent any short cycling of discharge
and return air.
Fasten the evaporator section down to the ceiling using the
provided drive screws, which can be found taped to the side
of the insulated evaporator section.
CAUTION! This must be done to prevent the entire
refrigeration system from moving during operation.
R
emote
R
efRigeRation
S
yStemS
Remote SyStemS With eleCtRiC VapoRizeR