Pulsafeeder Polyfeeder EN - Manual (Page 37)

37
6.7.2.3.3.2 CALIBRATING THE POLYFEEDER SYSTEM
Calibrating the Polymer Mixing
System
SYSTEM WILL OPERATE IN THE
NEXT STEPS
... MAKE SURE ALL
PROCESS VALVES ARE OPEN.
PRESS ENTER TO CONTINUE"
ENSURE CALIBRATION
COLUMN FULL. SELECT
MOTOR SPEED FOR
DRAWDOWN. PRESS ENTER TO
CONTINUE"
PROCEED WITH NEXT
CALIBRATION POINT
< UP/
DOWN > TO CONTINUE or
<ENTER> TO TERMINATE
<UP/DOWN/ENTER>
S TTING DOWN .. .
S UTTING THE POLYMER PUMP DOWN
HUTTING THE MIXER DOWN
LOSING THE INCOMING WATER VALVE
AT THE NEXT SCREEN ENTER THE
POLYMER FLOW RATE IN mllmin
<ENTER> TO CONTINUE
Figure 6-7-2-3-3-2Performing 4 Point System Calibration