Asante Technologies 100 - Manual (Page 14)

Management
Page 3-2
❏
Make sure the Enterprise ID field has a value of all.
❏
Type the lowest (beginning) IP address on your
network in the
Low IP Address field.
❏ Type the highest (last) IP address on your network
in the
Hi IP Address field.
❏
Select New in the Discovery Mode field to create a
new map, or select Append to attach this map to the
map that is stored in your system’s buffer (if any).
5
Click Apply.
IntraSpection builds a map of your network. The map con-
tains icons which represent each “discovered” SNMP
device on the network. Figure 3-1 is an example map.
Figure 3-1 Discovered network map
6
Click once on the AsantéFAST 100 Hub or AsantéFAST
100 TX Managed Hub’s icon .
The Device Page for the selected hub appears (see Figure
Figure 3-2 on page 3-3).
For information on the Device Page’s components, see
“Device Page Components” on page 3-2.
For information on performing basic management functions,
see “Performing Basic Management Functions” on page 3-7.
100NMM PM book Page 2 Wednesday, August 27, 1997 12:40 PM