Vaddio Adjustable Extension Wall Bracket for CONCEAL - Manual (Page 2)

Adjustable Extension Mounting Bracket for CONCEAL
Adjustable Extension Mounting Bracket for CONCEAL Installation and User Guide 342-0395 Rev. A Page 2 of 8
Overview:
The Adjustable Extension Wall Bracket for CONCEAL was
designed to allow the Vaddio CONCEAL Wall Mounting Systems
for the Vaddio HD-18, HD-19 and HD-20 PTZ HD Cameras to be
extended away from a wall, above or below a single wall
mounted LCD monitor or in-between two-wall mounted LCD
monitors. The aesthetic design of the Adjustable Extension Wall
Bracket for CONCEAL complements the WallVIEW HD-18, HD-
19 and HD-20 Camera Systems and conceals all cabling,
connectors and mounting hardware.
The narrow extension arm design of the Adjustable Extension Wall Bracket for CONCEAL also allows two
monitors to be closely spaced together with the Vaddio Camera centered and mounted in front of the monitors.
This mounting application also allows the Vaddio Camera to be placed in the most effective vertical position for
“eye to eye” centering for video conferencing applications. The extension arm is infinitely adjustable anywhere
from four (4) inches to eight (8) inches in length from the wall (depending on type of wall mounting installation
selected) and provides an easily adjustable custom fit of the camera to the monitor.
Intended Use:
Before operating the device, please read the entire manual thoroughly. The mount was designed, built and tested
for use indoors and to support the weight, size and shape of the Vaddio HD-18, HD-19, HD-20 and HD-USB
cameras. The use of this mount for any other heavier device could damage that device and/or create a potentially
unsafe operating condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.
In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,
do not immerse in water or other liquids and avoid extremely humid conditions.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
Unpacking:
Carefully remove the mount and all of the parts from the packaging. Unpack and identify the following parts:
 One (1) Adjustable Extension Wall Bracket for CONCEAL
 Four (4) #8 x 1.25” Screws and four (4) Drywall Anchors
 Four (4) #6-32 x 1” Phillips Machine Screws and four (4) Shoulder Washers
 Four (4) #10-32 x 3/8” Machine Screws (black), four (4) #10 Lock Washers (black) and four (4) #10-32 Nuts
(black)
 Documentation
A list of Vaddio Wall Mounts for additional cameras that can also be used with the Adjustable
Extension Wall Bracket for CONCEAL is on Page
Fig. 2: Vaddio WallVIEW HD-18, HD-19 and HD-20 Cameras with CONCEAL Wall Mounting System