Vaddio Canon BU-Series - Manual (Page 3)

Canon BU Series PTZ Camera Systems
Canon BU-Series PTZ Camera Installation and User Guide 341-909 Rev. C Page 3 of 8
BU-51H System
Carefully remove all of the parts from the packaging. Unpack and identify the following parts:
 One (1) Canon BU-51H PTZ Camera
 One (1) RJ-45F to DB-9 Adapter (998-1007-232)
 One (1) AC Cord Set (US or Euro and UK)
 Vaddio Manual
 Canon BU-51H Manual
Figure 3:
BU-51H Connected to Vaddio ProductionVIEW HD-SDI Console
Basic Connectivity of the BU-51H Indoor PTZ System:
The Vaddio/Canon BU-51H PTZ system uses a Cat.. 5e for RS-232 control to the camera. While the control Cat.
5e cable can be run up to 500’ (152.4m) from the camera, the Canon BU-51H is rated for a distance up to 246’
(75m). See Appendix 1 for wiring and pin-out information.
Optional Accessories:
NOTE: The mounts below are intended for indoor use only, using the BU-51H PTZ camera.
Canon BU-51H
PTZ Camera
RS-232 up to 500’ (152.4m) of
Cat. 5e for Control
ProductionVIEW HD-SDI
Mixer/Switcher
Coax Cable (from camera) for HD-SDI Video up to 246’
BU-51H Wall Mount
998-4150-001
BU-51H Pedestal Mount
998-4150-002
BU-Series CCU
999-4190-000 (NTSC)
999-4190-001 (PAL)
AC Cord
HD-SDI
INPUT