Vaddio CONCEAL Wall Mounting System for WallVIEW HD-19 DVI/HDMI User Manual

Page 2

Advertising
background image

CONCEAL Wall Mounting System

Vaddio ▪ 9433 Science Center Drive, Minneapolis, MN 55428 ▪ 800-572-2011 ▪ 763-971-4400 ▪ FAX: 763-971-4464,

www.vaddio.com

©2011 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice.
Vaddio, CONCEAL and WallVIEW are trademarks of Vaddio. All other trademarks are property of their respective owners. Document Number 342-0366 Rev A

Step 2: Secure the Camera To the CONCEAL Wall Mount Bracket
After all cables are attached to the camera, place the camera onto the camera mount and insert the two-(1/4”-20)
screws into the camera through the two-screw holes in the bottom of the mount.

Note: Be sure to align each side of the camera evenly to all sides of the CONCEAL Wall Mount Bracket
before final tightening of the mounting screws (see Fig. 3).


Step 3: Install the CONCEAL Lower Cover Plate:
Attach lower CONCEAL Lower Cover Plate (see Fig. 4). Slide lower cover plate from front of the mounting
bracket toward the rear of the bracket. The two-rear locking tabs will need to be guided into position first and will
lock in place as the lower cover plate is pushed toward the rear of the mounting bracket and the front tabs are
inserted (see Fig. 5).









Step 4: Install the CONCEAL Rear Camera Cover:
After successful testing of the camera, install the Conceal Rear Camera Cover on the CONCEAL Mounting
Bracket with the supplied screw (see Fig. 6 and 7).









.
Intended Use:
The CONCEAL Wall Mount was designed, built and tested for use indoors and to support the weight, size and
shape of the Vaddio HD-18 and HD-19 cameras only. Using this mount for any other device could damage that
device and/or create a potentially unsafe operating condition. This mount was not intended for use with any other
camera systems.

Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from

www.vaddio.com

free of charge.


Hardware Warranty
Please see the Vaddio website at

http://www.vaddio.com

for the Vaddio Statement of Warranty for all Vaddio

Products. The Statement of Warranty covers the policies and procedures of the Hardware Warranty, Exclusions,
Customer Service, Technical Support, Return Material Authorizations (RMA), Voided Warranty, Shipping and
Handling and Products Not Under Warranty. The Vaddio Warranty Statement supercedes all other published
warranty statements in content and coverages. Vaddio Technical Support can be contacted through the Vaddio
website or through e-mail support at

mailto:[email protected]

.





Fig.6: CONCEAL Rear Camera Cover

Fig. 7: Completed CONCEAL Wall
Mount Camera Bracket Installation

Fig.4: CONCEAL Lower Cover Plate

with Locking Tabs

Fig. 5: CONCEAL Lower
Cover Plate locked in place

Advertising