Vaddio CONCEAL Wall Mounting System for WallVIEW HD-USB, PowerVIEW HD-22 & 30 - Manual (Page 2)

CONCEAL Wall Mounting System
Vaddio ▪ 800-572-2011 ▪ 763-971-4400 ▪ FAX: 763-971-4464, vaddio.com
©2013 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice.
Vaddio, CONCEAL and WallVIEW are trademarks of Vaddio. All other trademarks are property of their respective owners. Document Number 342-0464 Rev B Page 2 of 2
Step 2: Secure the Camera To the CONCEAL Wall Mount Bracket
After all cables are attached to the camera, place the camera onto the camera mount and insert the two-(1/4”-20) screws into
the camera through the two-screw holes in the bottom of the mount.
Note: Be sure to align each side of the camera evenly to all sides of the CONCEAL Wall Mount Bracket before final
tightening of the mounting screws (see Fig. 3).
Step 3: Install the CONCEAL Lower Cover Plate:
Attach lower CONCEAL Cover Plate (see Fig. 4). Slide lower cover plate from front of the mounting bracket toward the rear of
the bracket. The two rear locking tabs will need to be guided into position first and will lock in place as the lower cover plate is
pushed toward the rear of the mounting bracket and the front tabs are inserted (see Fig. 5).
Step 4: Install the CONCEAL Rear Camera Cover:
After successful testing of the camera, install the Conceal Rear Camera Cover on the CONCEAL Mounting Bracket with the
supplied screw (see Fig. 6 and 7). Align the rear tab on the back of the mount with the screw and carefully tighten the screw.
Please do not over tighten the screw.
.
Intended Use:
The CONCEAL Wall Mount was designed, built and tested for use indoors and to support the weight, size and shape of the
Vaddio HD-USB camera only. Using this mount for any other device could damage that device and/or create a potentially
unsafe operating condition. This mount was not intended for use with any other camera systems.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are misplaced,
Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product drawings for the Vaddio
product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
Hardware Warranty
Please see the Vaddio website at http://www.vaddio.com for the Vaddio Statement of Warranty for all Vaddio Products. The
Statement of Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service,
Technical Support, Return Material Authorizations (RMA), Voided Warranty, Shipping and Handling and Products Not Under
Warranty. The Vaddio Warranty Statement supercedes all other published warranty statements in content and coverages.
Vaddio Technical Support can be contacted through the Vaddio website or through e-mail support at
mailto:[email protected] .
Fig.4: CONCEAL Lower Cover
Plate with Locking Tabs
Fig. 5: CONCEAL Lower
Cover Plate locked in place
Fig.6: CONCEAL Rear Camera Cover
with provided 6-32 Flat Head Screw
Fig. 7: Completed CONCEAL Wall
Mount Camera Bracket Installation