Vaddio Indoor Pendant Mount Dome - Manual (Page 5)

DomeVIEW HD - 12” Indoor Pendant Mount Dome
DomeVIEW HD - 12” Indoor Pendant Mount Dome Manual 342-0187 Rev. A Page 5 of 8
Unpacking:
Unpack and identify the following parts for 999-9100-200
DomeVIEW HD - Light-Duty Weather-Resistant 12” Outdoor Pendant Mount Dome Enclosure Package includes:
• One (1) Dome Enclosure Assembly with the following parts:
o
One (1) 1.5” NPT Pipe Flange
o
One (1) Rubber Gasket (to seal between pipe flange and plastic shroud)
o
One(1) UV Protected Plastic Enclosure Shroud
o
Three (3) 10-32 x .5” Pan Head Screws (attach through metal back can to the 2.5” stand-offs)
o
One(1) Sealed Metal Back Can (with weather stripping sealer around flange)
o
Four (4) ¼’-20 Keps Nuts (secures the 1.5” NPT pipe flange to the enclosure)
o
Three (3) 2.5” Long 10-32 Threaded F to F .5” Hex Stand-offs (supports the camera platform)
o
One (1) Universal Camera Platform
o
Three (3) 10-32 x .5” Pan Head Screws (attach the camera platform to the 2.5” stand-offs)
• Three (3) .75” Long 10-32 Threaded M to F .5” Hex Stand-off Extensions - Use with HD-20 Camera Only
• Two ¼”-20 x 5/8” Screws (attach HD-18 and HD-19 camera to platform)
• Two ¼”-20 x .3/8” Screws (attach HD-20 camera to platform) - do not use 5/8” Screws on HD-20
• 12” Optical-Grade Clear Dome with Three (3) Stainless Steel Screws Attached
o
Note: The 12” Smoke Tinted Dome can be purchased as an accessory for use indoors.
Other things that are needed for system completion:
• One (1) Vaddio HD-20, HD-19 or HD-18 PTZ Camera Package.
• 1.5” NPT Wall Mount/Pipe Mount/Structure Mount or 1.5” NPT Threaded Pipe (see Accessories - sold
separately)
Conveniently Located Accessory Section:
998-9000-210:
12” (304.5mm) Clear Dome Accessory
• Includes Clear Dome with Stainless Steel Screws
998-9000-220:
12” (304.5mm) Smoke Tinted Dome Accessory
• Includes Smoke Tinted Dome with Stainless Steel Screws
998-9300-000:
Wall Mount Kit for Pendant Mount Domes
• Heavy duty aluminum cast construction
• 1.5” NPT threads easily onto domes
998-9300-001:
Wall Mount with Pole Mount Kit for Pendant Domes
• Heavy duty aluminum cast construction
• 1.5” NPT threads easily onto domes
• Accommodates 3” (7.62cm) to 10” (25.4cm) poles
998-9300-002:
Structure Mounting Box Kit for Pendant Domes
• Mounting box with heavy duty 1.5” NPT thread adapter
• Requires 1.5” NPT pipe (not supplied)