Vaddio Quick-Connect 4 - Manual (Page 6)

Quick-Connect 4
Vaddio Quick-Connect 4 - Document 341-256-1 Rev C
Page 6 of 8
Control Inputs Control Input Connections
RJ-45 and DB-9F
RJ-45 Pins
1) DTR
(Sony* Daisy chain to DSR)
2) DSR (Sony* Daisy chain from DTR)
3) CTS (Canon Daisy chain to RTS)
4) RTS (Canon Daisy chain from CTS)
5) Unused
6) Digital
GND
7) RXD (from TXD of control source)
8) TXD (to RXD of control source)
DB-9 Pins
2)
Through to Pin 8 (TXD)
3) Through to Pin 7 (RXD)
5) Through to Pin 6 of RJ-45
Control Output
to Camera
Control Output Connection RJ-45
RJ-45 Pins
1)
DSR (Sony* Daisy chain from DTR)
2) DTR (Sony* Daisy chain to DSR)
3) RTS (Canon Daisy chain from CTS)
4) CTS (Canon Daisy chain to RTS)
5) Unused
6) Digital GND
7) TXD (to RXD of control source)
8) RXD (from TXD of control source)
CARE AND
CLEANING Do not attempt to take the Quick-Connect 4 apart. There are no user-
serviceable components inside. Disassembly of the device will void the
warranty.
• Do not spill liquids onto the device
• Keep this device away from food and liquid
• For smears or smudges, clear any dust with a blower and wipe
stains with a clean, soft cloth. Do not use any abrasive chemicals.
OPERATING AND
STORAGE
CONDITIONS Do not store or operate the Quick-Connect 4 under the following conditions
for any circumstance:
• Temperatures above 40°C (104°F)
• Temperatures below 0°C (32°F)
• High humidity, condensing or wet environments
• Dusty environments
• In inclement weather
• Under severe vibration
12345678
Control Out
to Camera
12345678
Control Inputs
5 1
*DTR/DSR also applies to Canon
VCC-50i Products featuring Vaddio’s
exclusive VISCA Control Translation
*DTR/DSR also applies to Canon
VCC-50i Products featuring Vaddio’s
exclusive VISCA Control Translation