Vaddio Quick-Connect PRO and WallVIEW PRO for AW HE120 - Manual (Page 4)

Quick-Connect PRO and WallVIEW PRO for the AW-HE120 Camera
© 2012 Vaddio - All Rights Reserved. Document Number 342-0497 Rev A Page 4 of 16
Overview:
The Vaddio Quick-Connect PRO HE120 series cabling system Kit (camera not included) and
the Vaddio WallVIEW PRO HE120 (camera included) was built and adapted for use with the
Panasonic AW-HE120. This system was designed for easier installation and integration.
The Panasonic AW-HE120 uses standard RS-422 control protocol. To be 100% compatible with Vaddio
equipment, everything is included to convert Vaddio’s RS-232 to RS-422. This allows for the operation with the
complete line of Vaddio ProductionVIEW™ HD consoles (Precision Camera Controller, ProductionVIEW HD,
ProductionVIEW HD MV and the ProductionVIEW HD-SDI MV with integrated multi-viewers.
The system uses high speed differential signaling (HSDS), an active transmission system that delivers low-loss,
high-quality HD video over Cat-5 cabling at distances up to 500’ (152.4m). The system is capable of the high
definition resolution video that the camera outputs, (HD) 1080i/59.94/50 field/s or 720p59.94/50 frames/s
component video. The Quick-Connect PRO system also has auto camera resolution sensing, analog component
video outputs (YPbPr), four position distance adjustment for Cat. 5 cabling, Y-Gain adjustment, 1-RU rack mount
Quick-Connect™ PRO System with HSDS and the EZ Interface Module (EZIM) that fastens to the back of the
camera mount. Like all Vaddio WallVIEW systems, the Thin Profile Wall Mount and mounting hardware is
included.
The AW-HE120 HD PTZ Camera features a 20x zoom lens and a three (3), 1/3-type 2.2 megapixel CMOS imager
sensors. The AW-HE120 has the ability to be controlled over IP or RS-422. It has HD/SD-SDI, HDMI and Analog
video outputs with concurrent SD output available.
The systems are available as a WallVIEW PRO HE120
System with the camera included, or as a Quick-Connect PRO Kit, without the camera. The Quick-Connect PRO
kit for the AW-HE120 is excellent when paired with a ProductionVIEW Precision Camera Controller because of
the
built-in basic CCU and its ability to produce remarkable video in a wide range of shooting conditions
Important Safeguards:
Read and understand all instructions and warranty statements before using. Do not operate any device if it has
been dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To
reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
Intended Use
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors, and with the provided power supply and cabling. The use of a power supply other than the
one provided or outdoor operation has not been tested and could damage the device and/or create a potentially
unsafe operating condition.
Save These Instructions
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
General Safeguard: Use only the power supply provided with the system. Use of any
unauthorized power supply will void any and all warranties. Please do not cut the
secondary side (or the DC side) of the power supply and attempt to extend the power to the
camera. The warranty is voided when the cable is cut.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermittent connections which,
can result in the RS-232 control line failing and locking up, and/or compromising the HSDS™
signals. For best results please use standard RJ-45 connectors and test all cables for proper pin-
outs prior to use and connection to Vaddio product.