Vaddio Quick-Connect USB User Manual
Page 7
Quick-Connect USB Interface
Quick-Connect USB, Document Number 342-0653 Rev. B
Page 7 of 36
Quick-Connect USB Interface
Image: Rear Panel with Feature Call-outs
1) Power
Input:
5.5mm OD x 2.5mm ID coaxial connector for the provided 24 VDC, 2.0 Amp switching power supply. The
Quick-Connect USB Supplies Power to the attached camera.
2) 5-Position Dip Switch:
A 5-position dip switch allows the user to choose the HD video color space (YCbCr for HDMI and
sRGB color space for DVI-D) on the HDMI output, configure for updates, and restore factory defaults when cycling power.
Table: Quick Connect USB Rear Panel Dip Switch Settings
3) RS-232 IN:
Serial RS-232 input on a RJ-45 connector. This control port allows a Vaddio joystick controller or 3
rd
party
controller (Crestron/AMX) to control the camera functions if the embedded webserver is not used for real time control.
4) RS-232 OUT TO CAMERA:
Serial RS-232 output on RJ-45 connects via Cat-5 to the camera RS-232 input on the
camera. Control signals from the embedded webserver are sent via RS-232, or RS-232 from external controllers is
relayed to the camera over this control port.
5) EZ POWER VIDEO:
RJ-45 jack used to supply 24 VDC power to the camera and return differential video from the camera
on Cat-5 cable at a maximum distance of 100’ (30.48m) with PTZ cameras and up to 150’ (45.7m) with stationary POV
cameras (i.e. ZoomSHOT and WideSHOT).
6) YPbPr Output:
Analog component video output on a DE-15 (HD15) connector (resolution is set on the back of the
camera). The YPbPr output resolution will be the same as the HDMI output resolution. SD video resolutions (Y/C and
CVBS formats) are not supported by the Quick-Connect USB Interface; however some progressive frame analog
component SD video is supported.
7) HDMI
Output:
The digital video output on the HDMI connector can either be YCbCr color space (normal HDMI mode) or
can be changed to DVI-D color space (sRGB) for older monitors and devices. The HDMI and YPbPr outputs work
simultaneously and are the same resolution (set at the camera).
8) Ethernet 10/100 Network RJ-45 Jack:
The Ethernet jack will have yellow and green lights to indicate connectivity and
activity of the network on that jack. The Ethernet jack will stream video (up to 1080p/30 H.264 and can be set from the
internal web pages much like the HD-USB Camera. The resolutions will available in a three (3) stage quality format (High
Quality, Good Quality and Standard Quality targets) and includes a range of CIF to 1080p/30.
9) USB 2.0 Connector:
The USB 2.0 is on a Type-B female jack and connects to a PC running a soft-client video
conferencing system or video capture software that uses UVC (USB Video Class) standard drivers. No other USB 2.0
drivers are required to plug the QC-USB into a computer and have it work. The UVC drivers will auto negotiate the top
resolution that the PC and QC-USB can accomplish together and auto-implement.
Dip Switch
Function
Default
Activation
1
Future Use
Up
n/a
2
Future Use
Up
n/a
3
Color Space HDMI Connector
Up = HDMI (YCbCr)
Down = DVI (sRGB)
4
Program/ Update
UP = No Program
DOWN = Ready To Program
5
Future Use
Up
n/a
All Down
Reset to Defaults
All UP
ALL DOWN (with power cycle)
①
②
④
③
⑥
⑤
⑦
⑨
⑧