Vaddio WallVIEW PRO 300 User Manual

Page 5

Advertising
background image

WallVIEW PRO 300

WallVIEW PRO 300 Installation and User Guide 341-668 Rev. B Page 5 of 10

CARE AND CLEANING

• Do not attempt to take the products in the system apart. There are no user-serviceable components.

• Keep the devices away from food and liquid, and do not spill liquids on the products.

• For smears or smudges on the lens, wipe with a clean, soft cloth. Do not use any abrasive chemicals on

the camera body at any time.

OPERATING AND STORAGE CONDITIONS
Do not store or operate the WallVIEW PRO System under the following conditions:

• Temperatures above 40°C (104°F) or below 0°C (32°F), for Indoor Use Only

• High humidity, condensing or wet environments

• Dusty

environments

• In inclement weather

• Under severe vibration


GENERAL SPECIFICATIONS

Quick-Connect Interface

Connectors

Power Connector: 5.5mm OD x 2.5mm ID
Power RJ-45: Supplies 36V to EZCamera Interface Module Regulator
IR: 2-Pin Phoenix type spring cage connector
Video Outputs: BNC Connectors for HD Analog Component (Y,PB,PR) or SD
Video RJ-45: Transports HD or SD video from camera depending on camera selection switch position

Camera Select Switch

8-Position DIP switch loads camera profiles and IR Forwarding for Polycom and TANDBERG Codecs

Video Adjustments

Y-Gain (luminance gain) for fine tuning over longer cable distances
Distance Compensation: 100’, 200’, 300’, 400’+

Compatible Cameras

Sony BRC-H700, BRC-Z700, EVI-HD1, BRC-300, (EVI-D70, EVI-D100 also in SD Mode)
Polycom EagleEye

Max. Cat. 5 Cable
Distance

Up to 500’ (152.4m) for Video Power and Control

Power Supply

36 VDC, 2.78 Amp

Dimensions

1-RU Rack Mount (1.75” H x 19” W x 6” D)

EZCamera Interface Module

Connectors

Four (4) RJ-45 Connectors
One DB-25 for Power, Video, Control & IR

Cable Assemblies

For Sony SD Cameras: DB-25M to RCA-M/4-Pin Mini Din/8-Pin Mini Din x 2/EIAJ4 Power Connector

Power Regulator

Supplies 12VDC to Cameras

Dimensions

Approx. (3.035” H x 4.46” W x 1.242” D)

WallVIEW 300 System

System Part Numbers

999-6205-000 NTSC
999-6205-001 PAL

Sony BRC-300 Camera

Camera Part Number

BRC-300

Image Sensor

1/4.7-type CCD

Effective Pixels

Approx 1-Mill Pixels (x 3)

Signal Systems

NTSC or PAL

Video Resolutions

480i

Lens

12X Optical, 4X Digital, 48X total

Horiz. Viewing Angle

3.3 to 37.8 degrees (4:3); 4.0 to 45.4 degrees (16:9)

Weight

Approx. 5 lbs 8 oz (2.5 kg)

Dimensions

Approx 7-1/8” W x 8-3/8” H x 8-1/8” D
(180mm x 210.1mm 205mm)

Advertising