Vaddio WideSHOT WallVIEW Mini User Manual
Page 7
WideSHOT WallVIEW Mini
WideSHOT WallVIEW Mini, Document Number 342-0710 Rev B
Page 7 of 32
Rear Panel Connections with Feature Call-outs
Image: WideSHOT HD Camera Rear View
1) RS-232 & IR Out: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR
signaling received by the front IR receiver, which can be transmitted to third party devices. The WideSHOT will
not react to the remote if the IR is off. IR forwarding is only available in the SR Quick-Connect models.
2) EZ Power/Video Port: This RJ-45 connector is only used with the Quick-Connect SR, Quick-Connect DVI-
D/HDMI SR Interface, Quick-Connect USB and USB Mini Interfaces to supply power and return HSDS
(differential) video from the camera over Cat-5 cable up to distance of 150’ (45.72m).
3) WideSHOT Dip Switch Settings: Settings for IR remote frequency, IR receiver on/off, image flip, test bars
and defaults can be configured on these switches. See the Switch Settings page for additional information. The
dip switch settings are as follows:
Table: WideSHOT Dip Switch Settings
4) HD Video Select: A rotary switch allows the user to choose the HD output video resolution and format. After
setting or changing the resolution, reboot the camera to ensure proper operation. If an unassigned rotary
selection position is chosen (3, 9, A, B, C or D), the camera will output a medium grey video privacy mask.
Simply set the rotary switch to an assigned position to output video. The HD Video Select rotary switch settings
are as follows:
Table: WideSHOT HD VIDEO Selections
Notes:
1) For USB 2.0 streaming, use position “0” (720p/59.94) for best results
2) Set the rotary switch to an assigned position. A medium grey privacy mask is displayed on unassigned positions.
Dip Switch
Function
1
Up = IR1, Down = IR2
2
Up = IR 1 or 2, Down = IR3
3
Up=IR ON, Down = IR OFF
4
Up = Normal Image, Down = Image Flip
5
Test Bars
6
Update Position - Leave UP unless updating firmware
All Down
Reset to Defaults - with power cycle
Rotary
Resolutions
Rotary
Resolutions
0
720p/59.94 (USB)
8
576p/5
0
1
1080i/59.94
9
--
2
1080p/59.94
A
--
3
--
B
--
4
720p/50
C
--
5
1080i/50
D
--
6
1080p/50
E
1080p/29.97
7
480p/59.94
F
1080p/25
①
②
③
④
Point the notch in the switch stem to assign
the rotary position.
6 - Position
Dip Switch