Vaddio ZoomSHOT WallVIEW SR - Manual (Page 3)

Zoom SHOT WallVIEW SR
ZoomSHOT WallVIEW SR System Document Number 342-0651 Rev B Page 3 of 16
O VERVIEW
:
The Vaddio ZoomSHOT HD camera produces amazing results for
small, medium and large room applications. Anywhere that a Point-
of-View or stationary camera can be used alone or in conjunction
with a Vaddio PTZ camera to simplify camera coverage and preset
positioning, the ZoomSHOT is the answer.
Essentially, the ZoomSHOT is a low cost pan/tilt/zoom camera,
where the pan and tilt are adjusted manually. However, unlike
security-type stationary cameras, the ZoomSHOT is equipped with a
19X optical power zoom lens that produces a horizontal field of view
ranging from 58º on the wide end to 3.1º on the tele end in a HD 16:9
format.
ZoomSHOT HD is a camera with a unique pedigree. Designed from
the ground up, this HD camera uses the Vaddio EZCamera™ Cat-5
wiring standard for video, power and control. Using HSDS™ (high
speed differential) video outputs over Cat-5 cable, the ZoomSHOT
sports a wide range of video resolutions that are selectable from the
rear panel; from 480p/59.94-YPbPr up to and including 1080p/60.
The HSDS processing allows delivery of the HD video signals up to
150’ (45.72m).
Choose between three (3) IR frequencies for the Vaddio IR Shot
Commander to allow multiple cameras to be locally IR controlled with
a single remote control. The ZoomSHOT also has an OSD (on
screen display) for easy set-up and basic image control that’s
accessible with the IR remote. Up to six (6) camera zoom presets
can be programmed and recalled via the remote or RS-232 (up to 16
zoom presets with RS-232). IR signal forwarding is also included.
ZoomSHOT is paired with the tried-and-true Quick-Connect SR
Interface in this package which represents a super-high value and a
very low price. So breathe easy, and try a ZoomSHOT today!
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors with the power supply provided. The use of a power supply, other than the one provided, or
outdoor operation has not been tested and could damage the device and/or create a potentially unsafe operating
condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or
damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the risk of
electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
Use only the power supply provided with the system. Use of any unauthorized
power supply will void any and all warranties.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermittent connections which
can result in the RS-232 control line failing and locking up, and/or compromising the HSDS (high
speed differential) signals. For best results please use standard RJ-45 connectors and test all
cables for proper pin-outs prior to use and connection to Vaddio product.
Image:
ZoomSHOT HD Camera
Image:
ZoomSHOT Rear Panel