Woodhead RFL8 SERIE - Manual

SM1110-05A Page 1 of 2 ©Aug-01
RF6, RFL6, RF8 & RFL8 SERIES
Service Manual
AERO-MOTIVE COMPANY
A Woodhead Industries, Inc. Subsidiary
IMPORTANT SAFETY INSTRUCTIONS
Please read this manual carefully and follow its instructions. Improper use or failure to follow these instructions could
result in serious injury, death or property damage. Operators should be instructed in the safe and proper use and
maintenance of this product. Keep this manual for future reference.
The following safety precautions call attention to potentially dangerous conditions.
DANGER:
Immediate hazards which WILL result in severe personal injury or death.
WARNING:
Hazards or unsafe practices which COULD result in severe personal injury or death.
CAUTION:
Hazards or unsafe practices which MAY result in minor personal injury or product or
property damage.
NOTE: Instruct operators in the safe, proper use and maintenance. Keep this manual for future reference.
INSTALLATION
WARNING:
Improper use or failure to follow these instructions lead to hazards or unsafe practices
that COULD result in severe personal injury or death.
CAUTION:
Operator should be instructed in the safe, proper use and maintenance of this product.
Hazards or unsafe practices MAY result in minor personal injury or product or property
damage.
CAUTION:
Always use a NEW cotter pin when securing clevis pin. Hazards or unsafe practices MAY
result in minor personal injury or product or property damage.
SWIVEL MOUNTING
Hang balancer directly over work area by the swivel fork provided at the top
of the balancer. Support component must confirm to guidelines indicated
by
the adjacent diagram. The support component must allow swivel fork to
pivot 30 degrees from vertical axis, perpendicular to clevis pin axis.
Balancer must not be pulled sideways more than 30 degrees or exceed the
free play between support component and swivel fork. To complete
balancer mounting, install clevis pin through swivel fork and support
component. Install flat washer and secure with a new cotter pin (in plastic
bag).
SECONDARY SUPPORT
WARNING:
Always use secondary cable to protect personnel in case of mounting components or
support structure failure. Hazards or unsafe practices which COULD result in severe
personal injury or death.