Yorkville YSM5 - Manual (Page 4)

Model YSM-5 YSM-6 YSM-8
Active or Passive Active Active Active
Program Power (Watts) 45 65 95
Biamp / Configuration Yes-Two Way Yes-Two Way Yes-Two Way
Max SPL (dB) 105 105 105
Frequency Response (Hz +/- 3db) 52Hz-20kHz 50Hz-20kHz 45Hz-20kHz
Crossover Frequency (Hz) 3.0 kHz 2.6 kHz 2.4 kHz
HF Driver(s) Neo Soft dome
Ferro Fluid
Neo Soft dome
Ferro Fluid
Neo Soft dome
Ferro Fluid
HF Program Power (Watts) 15 20 25
HF Dispersion (°H x °V) 60° 60° 60°
HF Protection Therm, Over voltage Therm, Over voltage Therm, Over voltage
LF Driver/s 5-inch composite 6.5-inch composite 8-inch composite
LF Program Power(Watts) 30 45 70
LF Impedance (ohms) 4 4 4
LF Protection Therm, O.V Therm, O.V,clip Therm, O.V,clip
Sheilding Yes Yes Yes
HF Power Amplifier (Watts) 15 18 20
HF Amplifier Type A/B A/B A/B
HF Distortion 0.03 0.08 0.08
LF Power Amplifier (Watts) 30 50 75
LF Amplifier Type A/B A/B A/B
LF Distortion 0.02% 0.02% 0.02%
LF Processing Analog Analog Analog
Cooling Scheme convection convection convection
Power Cable included included included
Power Switch front/back litf ront/back litf ront/back lit
Power Consumption (typ/max) 40/100 VA 40/100 VA 40/100 VA
Inputs - 1/4-inch Jacks 1 1 1
Inputs - XLR 1 1 1
Input Sensitivity (Vrms Sine) 0.2 0.2 0.2
Level Controls 1 1 1
EQ Controls 1 2 2
Limiter yes Yes yes
LED Indicators power on front power on front power on front
Other Controls / Features base foam pad base foam pad base foam pad
Enclosure Materials mdf mdf mdf
Baffle Material mdf mdf mdf
Covering / Finish Enamel Enamel Enamel
Optional Covering / Finishes N/A N/A N/A
Dimensions (DWH xbackW, inches) 9.5 x 7.5 x 11.5 10 x 9.5 x 15 10.8 x 10.5 x 16.5
Dimensions (DWH xbackW, cm) 24.13 x 19.05 x 29.21 25.4 x 24.13 x 38.1 27.43 x 26.67 x 41.91
Weight (lbs/kg) 15/6.8 21/9.5 28/12.7
Specifications