Care and maintenance – Kegco CBC-101-SSC User Manual

Page 6

Advertising
background image

www.kegco.com

6

1-800-710-9939

Care and Maintenance

Defrosting your beverage cooler:

Defrost the Beverage Cooler when the frost accumulated on the evaporator is about 5mm (1/5 inch) thick. Set
the thermostat dial to the “0” position. Defrosting usually takes a few hours. After defrosting, return the
thermostat dial to the desired position. To defrost quickly remove beverages from the Beverage Cooler and
leave the door open.

Never use a knife or other metal instrument to scrape ice/frost from the evaporator.

Cleaning your beverage cooler:

Turn off the power, unplug the appliance, and remove all items including all shelves.

Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.

Wash the shelves with a mild detergent solution.

Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.

Wash the outside cabinet with warm water and mild liquid detergent. Rinse and wipe dry with a clean soft cloth.

Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless steel with steel
particles and rusting may occur.

Dust the front grill and back of the unit twice yearly. Make sure the power is off before cleaning.

It is recommended to clean the unit completely inside and out yearly to maximize the longevity of the product.

Moving Your beverage cooler:

Remove all bottles and any other items you may have inside the unit.

Securely tape down all loose items (shelves) inside your appliance and tape the door shut.

Turn the adjustable leg up to the base to avoid damage.

Be sure the appliance stays secure in the upright position during transportation.

Protect the outside of the appliance with a blanket or similar item.























Advertising