Acer Altos G300 Series - Manual (Page 116)

5 Configuring IDE Software RAID 104
Physical Drive
To view the Physical Drive Properties and Error Status, click the button
next to physical drive you want to view.
After you click the button, the Physical Drive ID displays in the right
frame. The links to the RAID controller Properties and Error Status
page are listed as shown below. Click on the link Properties to display
the Physical Drive Properties. Click the Error Status to display the
Physical Drives Error Status.
PCI Bus ID Specifies the PCI Bus ID of the RAID controller.
Device ID Specifies the Device ID of the RAID controller.
Primary Channel Base
Address Specifies the Primary Channel Base Address of the RAID
controller.
Primary Channel
Control Address Specifies the Primary Channel Control Address of the RAID
controller.
Secondary Channel
Base Address Specifies the Secondary Channel Base Address of the RAID
controller.
Secondary Channel
Control Address Specifies the Secondary Channel Control Address of the RAID
controller.
aa300.book Page 104 Tuesday, December 17, 2002 5:27 PM