Kolo shelter – American Bicycle Security Company Kolo User Manual
Page 5
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Kolo Shelter
Installation Instructions
Installation Steps:
1. Place Uprights based on footing diagram and drill (4) 5/8”
diameter pilot holes in concrete 11” deep for each Upright.
Remove Upright and use pilot holes to drill 1” diameter
holes 11” deep. Drive in Simpson Torq-Cut Anchor, place
Upright and install washers and nuts finger-tight.
2. Lift the Center in place and fasten
finger-tight with (8) 5/8x7.5” bolts,
lock washers and nuts.
3. If building a Kolo shelter with Dero
Decker racks, lift the Dero Decker Beam
in place and fasten with (8) 5/8x7.5”
bolts, lock washers and nuts.
4. If building a Kolo shelter with Dero
Campus Racks, lift the Campus Rack in
place and fasten with (8) 5/8x7.5” bolts,
lock washers and nuts