American Bicycle Security Company WM Series - Manual

Product WM
Capacity WM-7: 7 bikes
WM-11: 11 Bikes
Size WM-7: 10’ Long
WM-11: 15’ Long
Materials *Reference these numbers when viewing diagram below.
1. 1- 5 /
8
” OD Bike Frame with 7 /
8
” Vertical Posts – QTY. 2
2. 1- 5 /
8
” OD Pipe Rail – QTY. 1
3. 1- 5 /
8
” OD End Frames – QTY. 1
Finishes An after fabrication hot dipped galvanized finish is our standard
option.
Our powder coat finish assures a high level of adhesion
and durability by following these steps:
1. Sandblast
2. Epoxy primer electrostatically applied
3. Final thick TGIC polyester powder coat
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
www.ameribike.com
Email: [email protected]
WM Rack
Assembly Instructions
Attach Bike Frame (1) to
support frames (2) using
supplied hardware.
Attach Pipe Rail (3) to
the support frames (2).
Attach Support Frames
(2) to a wall using
installer provided
hardware.