Tool kit – American Bicycle Security Company Tool kit User Manual
Page 4
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Tool Kit
Wall Mounted Installation
Installation Steps:
Instructions:
1. The Tool Kit wall-mount should be installed with the center of the Tool Kit 54” above the ground.
2. There are 4 mounting holes; only 2 need to be used. For installations into a vertical stud, use the 2 vertically
oriented holes. The horizontally oriented holes can be used for other types of installation. 3/8” wedge anchors, lag
bolts, or other fasteners may be used.
3. Once the base is installed, place the tool cables in the slots, and fasten the cap with the provided 3/8” tamper
resistant bolt.
4. The wall guard can be mounted to prevent hanging tools from damaging the wall.
1.
2.
4.
3.