Document Outline

• SCOM Protocol Manual
  • Foreword
  • 1 Interface Configuration
  • 2 Ethernet Communication
    • UDP
    • TCP/IP
    • HTTP
    • WINS
    • Sample Application
  • 3 Message Format and Description
  • 4 Monitor Addressing
  • 5 Protocol Description and Timings
    • Conditions for Response Message
  • 6 Command Reference
    • 6.1 BRT
      • Backlight Brightness
    • 6.2 MAN
      • Manufacturer ID
    • 6.3 VER
      • Unit ID and Model / Version Number
    • 6.4 POT
      • Local Control
    • 6.5 MCC
      • Unit Control Command
    • 6.6 MCC_BRIGHTNESS (0x81)
      • Brightness
    • 6.7 MCC_CONTRAST (0x82)
      • Contrast
    • 6.8 MCC_SCALINGMODE (0x8C)
      • Scaling Mode
    • 6.9 MCC_INPUTMAINSELECT (0x98)
      • Main Video Signal Source
    • 6.10 MCC_GAMMAVALUE (0x9D)
      • Gamma Value
    • 6.11 MCC_ PIPWINDOWSIZESELECT (0xA6)
      • PIP (Picture In Picture) Window Size Selection
    • 6.12 MCC_PIPSOURCESELECT (0xA7)
      • PIP (Picture In Picture) Video Signal Source
    • 6.13 MCC_COLOURTEMP (0xB3)
      • Color Temperature
    • 6.14 MCC_REDLEVEL (0xB4)
      • Red Channel Level
    • 6.15 MCC_GREENLEVEL (0xB5)
      • Green Channel Level
    • 6.16 MCC_BLUELEVEL (0xB6)
      • Blue Channel Level
    • 6.17 TYP
      • Unit Type and Model Number
    • 6.18 ETC
      • Elapsed Time Counter
    • 6.19 LAU
      • Lauer Extension
    • 6.20 LAU_CONFIG_GETFWVERSION (0x0101)
      • Firmware Version
    • 6.21 LAU_CONFIG_GETHOSTNAME (0x0102)
      • Host Name
    • 6.22 LAU_CONFIG_GETIFNAME (0x0103)
      • Internal Network Interface Name
    • 6.23 LAU_CONFIG_GETMACADR (0x0104)
      • MAC (Ethernet) Address
    • 6.24 LAU_CONFIG_GETIPADR (0x0105)
      • Static IP Address
    • 6.25 LAU_CONFIG_GETIPMASK (0x0106)
      • Subnet Mask
    • 6.26 LAU_CONFIG_GETGWADR (0x0107)
      • Gateway Address
    • 6.27 LAU_CONFIG_GETDHCPMODE (0x0108)
      • DHCP Mode
    • 6.28 LAU_CONFIG_GETDHCPTIMEOUT (0x0109)
      • DHCP Timeout
    • 6.29 LAU_CONFIG_GETUDPRCVPORT (0x010A)
      • UDP Receive Port
    • 6.30 LAU_CONFIG_GETUDPSNDPORT (0x010B)
      • UDP Send Port
    • 6.31 LAU_CONFIG_GETMANUFACTURER (0x010C)
      • Manufacturer
    • 6.32 LAU_CONFIG_GETDEVICENAME (0x010D)
      • Device Name
    • 6.33 LAU_CONFIG_GETDILMODE (0x010E)
      • DIL Switch Mode
    • 6.34 LAU_CONFIG_GETDISPLAYADR (0x010F)
      • Monitor Address
    • 6.35 LAU_CONFIG_GETCOMSERMODE (0x0110)
      • SCOM Serial Interface Mode
    • 6.36 LAU_CONFIG_GETCOMBAUD (0x0111)
      • SCOM Serial Interface Baudrate
    • 6.37 LAU_CONFIG_GETC118BAUD (0x0112)
      • Internal Video Controller Serial Interface Baudrate
    • 6.38 LAU_CONFIG_GETPOTMODE (0x0113)
      • POT Mode
    • 6.39 LAU_CONFIG_GETECDISMODE (0x0114)
      • ECDIS Mode
    • 6.40 LAU_CONFIG_GETECDISBACKLIGHT (0x0115)
      • ECDIS Default Backlight Level
    • 6.41 LAU_CONFIG_GETECDISCONTRAST (0x0116)
      • ECDIS Default Contrast Level
    • 6.42 LAU_CONFIG_GETECDISCOLOURTEMP (0x0117)
      • ECDIS Default Color Temperature
    • 6.43 LAU_CONFIG_GETECDISREDVALUE (0x0118)
      • ECDIS Default Red Channel Value
    • 6.44 LAU_CONFIG_GETECDISGREENVALUE (0x0119)
      • ECDIS Default Green Channel Value
    • 6.45 LAU_CONFIG_GETECDISBLUEVALUE (0x011A)
      • ECDIS Default Blue Channel Value
    • 6.46 LAU_CONFIG_GETECDISGAMMA (0x011B)
      • ECDIS Default Gamma Value
    • 6.47 LAU_CONFIG_GETREMOTECONTROL (0x011C)
      • Remote Control Configuration
    • 6.48 LAU_CONFIG_GETUSEBROADCAST (0x011D)
      • Remote Control Broadcast Mode
    • 6.49 LAU_CONFIG_GETADDRESSLIST (0x011E)
      • Remote Control Address List
    • 6.50 LAU_CONFIG_GETANALOGTOBRT (0x011F)
      • Analog to Brightness Routing Mode
    • 6.51 LAU_CONFIG_GETLCDCONTROLDISABLE (0x0120)
      • Video Controller Control Mode
    • 6.52 LAU_CONFIG_GETDINCONFIG (0x0121)
      • Digital Input Configuration
    • 6.53 LAU_CONFIG_GETBRTRANGEDELTAM (0x0122)
      • Backlight Level Down Range
    • 6.54 LAU_CONFIG_GETBRTRANGEDELTAP (0x0123)
      • Backlight Level Up Range
    • 6.55 LAU_CONFIG_GETSERIALNUMBER (0x0125)
      • Serial Number
    • 6.56 LAU_CONFIG_GETDISPLAYGROUP (0x0127)
      • Monitor Group
    • 6.57 LAU_CONTROL_ECDISMODE (0x0201)
      • ECDIS Mode Control
    • 6.58 LAU_CONTROL_BUZZER (0x0202)
      • Buzzer Control
    • 6.59 LAU_CONTROL_DIGITALOUT (0x0203)
      • Digital Output Control
    • 6.60 LAU_CONTROL_ANALOGTOBRT (0x0204)
      • Analog to Brightness Routing Control
    • 6.61 LAU_CONTROL_LCDCONTROLDISABLE (0x0205)
      • Video Controller Mode Control
    • 6.62 LAU_CONTROL_DINCONFIG (0x0206)
      • Digital Input Configuration
    • 6.63 LAU_STATUS_IPADR (0x0301)
      • Current IP Address
    • 6.64 LAU_STATUS_DISPLAYADR (0x0302)
      • Current Monitor Address
    • 6.65 LAU_STATUS_SCOMSERMODE (0x0303)
      • Current SCOM Serial Interface Mode
    • 6.66 LAU_STATUS_POTMODE (0x0304)
      • Current POT Mode
    • 6.67 LAU_STATUS_ECDISMODE (0x0305)
      • Current ECDIS Mode
    • 6.68 LAU_STATUS_BUZZER (0x0306)
      • Current Buzzer State
    • 6.69 LAU_STATUS_BACKLIGHT (0x0307)
      • Current Backlight State
    • 6.70 LAU_STATUS_DIGITALOUT (0x0308)
      • Current Digital Output Pin State
    • 6.71 LAU_STATUS_DIGITALIN (0x0309)
      • Current Digital Input Pin State
    • 6.72 LAU_STATUS_ANALOGIN (0x030A)
      • Current Analog Input Value
    • 6.73 LAU_STATUS_ANALOGTOBRT (0x030B)
      • Current Analog to Brightness Routing Mode
    • 6.74 LAU_STATUS_LCDCONTROLDISABLE (0x030C)
      • Current Video Controller Control State
    • 6.75 LAU_STATUS_DINCONFIG (0x030D)
      • Current Digital Input Configuration
    • 6.76 LAU_STATUS_CFGWRITECOUNTER (0x030E)
      • Configuration Write Counter
  • 7 Sample Communication Application