Beijer Electronics EXTER T150 EN - Manual (Page 11)

Installation
Beijer Electronics, MAEN775C 11
2.2.1 Mode Switches
All mode switches must be in OFF position during operator panel use.
The mode switches should not be touched unless by qualified personell.
2.2.2 Connections to the Controller
For information about the cables to be used when connecting the operator panel to
the controller, please refer to the help file for the driver in question.
2.2.3 Other Connections and Peripherals
– Cables, peripheral equipment and accessories must be suitable for the application
and its environment. For further details or recommendations, please refer to the
supplier.
Caution
When using a compact flash card, do not remove the card when the busy
indicator is illuminated.
1
24
VD
C
CF
CARD
COM
1
RS
422 RS
485 COM
2
RS
232 10
/100
EXP
ANSION
BUSY
MODE 1234 ON
DIP
MODE
1234
ON
DIP