2 date/time, 3 erase project, 4 touch calibrate – Beijer Electronics iX Panel TA100 EN User Manual
Page 28: Date/time, Erase project, Touch calibrate
Advertising
Service Menu
8.3.2
Date/Time
Use the Date/Time Settings dialog to set the time zone, date and time for the
panel.
8.3.3
Erase Project
The erase function will detect if the project is located in the panel memory or on a
memory card. Pressing Erase Project will completely remove the project and all its
components from the panel memory/the memory card.
8.3.4
Touch Calibrate
Select Touch Calibrate if the touch screen needs to be calibrated. Follow the
instructions on the screen to perform a calibration.
Beijer Electronics, MAEN013A
28
Advertising