Audiovox CMD-9000 - Manual (Page 30)

with animation.
3. The Phone’s Memory Stack is updated as to the number of unreviewed messages in your Voice Mail.
Voice Mail Notification with Mail Retrieval Service (MRS)
1. The phone sounds a short beep tone.
2. Press to answer the incoming call, your phone will be connected to your Voice Message Service so that you
may retrieve your messages.
3. If you choose not to answer the incoming call, “Message Retrieval” will be stored in the stack for retrieval of your
messages at a later time.
To Display the Number of Voice Mail Messages
Example:
1. Press . A mark “ * “ is flashing, when a new message is available.
2. Press to select “VOICE”.
The number of messages in your Voice Mail will be displayed.
3. If a Text Message is attached to the Voice Mail Notification, the text Message can be reviewed by . Otherwise
this step is skipped.
4. Press . Scroll to “QUIT” or “ERASE” the notification you reviewed.
5. Press .
6. To erase the Voice Mail Notification, scroll to “YES”, otherwise NO”, and press .
Voice Mail Dialing
You can store one set of linked numbers in a specially provided memory, and access these numbers with one touch of the
“Voice Mail Access” key .
To Store the Voice Mail Access Number
Please see “To Store Linked Numbers in Phonebook” and follow the steps 1 ~ 3 to make a set of linked numbers. Press
to store. Up to 80 digits of linked numbers can be stored including link mark “ = “. You can
also add a Name Tag (up to 20 to 24 characters) with your voice mail number. See To Store a Name with Phone Number.
To Call Your Voice Mail
1. Press and hold . The first number will be displayed and dialed.
2. Press . The second number will be displayed and sent in Touch Tone™ signal.